
GuardNVR Installation Manual 7
Version 4.3 Series
2.1.2 Placement conditions
Position the GuardNVR and peripheral devices to provide comfort and safety.
Set the GuardNVR on a flat surface at a comfortable height and distance. If the monitor
is connected it should be no higher than eye level to avoid eyestrain.
Do not place any liquid containers on the GuardNVR system, such as water, coffee, or
beverage. If liquid is poured onto the GuardNVR, it can cause a system malfunction or
fire.
Prevent the power cable from being severely bent by a heavy object. This may cause
fire.
Clean the dust around the GuardNVR on a regular basis. When cleaning the system,
always use a dry cloth. Do not use wet cloth or other organic solvents. This may
damage the surface of the GuardNVR and may cause system malfunction or electric
shock.
When pulling the power cable from the plug, do so gently. Do not touch the plug with
wet hands and avoid using the plug if the holes on the outlet are too loose. This may
cause fire or an electric shock.
Do not attempt to disassemble, repair, or modify the GuardNVR yourself. It is
extremely dangerous due to high voltage running through the GuardNVR. This may
cause fire, electric shock, or serious injuries.
Keep at least 15cm (6inches) between the back of the GuardNVR and a wall for the
cables connected into the GuardNVR. Otherwise, cables may be bent, damaged, or cut.
This may cause fire, electric shock, or injuries.
The power outlet must be grounded, and the voltage range must be within 10% of the
voltage rate. Do not use the same outlet with a hair dryer, iron, refrigerator, or any
heating appliances. This may cause fire, heating, and an electric shock.
Do not place any heavy object on the GuardNVR system. This may cause system
malfunction.
The GuardNVR can be damaged from a strong impact or vibration. Avoid throwing
objects within the vicinity of the GuardNVR.
Commenti su questo manuale